Welcome to Our Website

Activity code wifi hacker program v1.02

Download iCloud Remover 1.0.2

Online Hacks is a tool that can add to our account: wood, iron, stone, gold, diamonds. If you want to get a new activation key, you will need to buy it. One key cost $80, if you are intrested feel free to contact me: [email protected] Mobileworld: All Application Serial key. Be the first to know about our latest products. Download Hacker's Utility v Program untuk hacking program windows 95/98/NT dan lainnya - Download Ultra Zip Password Cracker v Program untuk mengcrack file Zip yang dipassword - Download program RePWL v Program untuk mengetahui berbagai password di Windows dari file PWL. Back-up your original Steam executable before. Smart Key Tool is a powerful maintenance tool for Android smartphones, compatible with all Windows 32-bit, 64-bit operating systems.

  • 200+ Best Hacking websites images in 2020
  • 10 Best Android Hacking Apps And Tools For 2020
  • Shenzhen Wansview Technology CO., Ltd
  • Download Android Multi Tools v1.02b 2020 [Latest Version]
  • 9 Ways To Reset / Remove BIOS Password For Lenovo, HP
  • Smart Key Tool V1.0.2 Full Cracked Download Free
  • Download latest SigmaKey Software for Flash, Repair and
  • Download xHamster.com Premium Accounts Generator

Key generator how do I download files from the NETGEAR Download Center

Tweak the performance of your ASUS PC with AI Suite II for the Windows. Recover lost Windows 10/7/8/Vista/XP network passwords. B4R Tutorial ESP8266 - WiFi Remote Configuration Other rESP8266WiFi library for ESP8266 v2.50 and ESP32 v1.02 B4R Question ESP8266 - wifi and socket B4R Tutorial ESP8266 - Getting Started B4R Tutorial ESP Configurator based on B4RSerializator B4R Tutorial Connecting two ESP8266 boards. Free, Simple WiFi Password Hacker Software Free WiFi Password Hacker 2 steps to CRACK ANY WiFi passwords on Laptop or PC! WiFi Hacker – Password Hacking Software Free. Avira Antivirus Pro Key 2020 Crack License Key Activation. This document will assist you with product unpacking, installation and setup.

Data Recovery Software Products

NirSoft - freeware utilities: password recovery, system

How do I update the firmware on my NETGEAR router with a https://av-dis.ru/download/?file=398. Confused looking for Child of Light CD key generator No Survey No Password on the Net. RJL Software - Software - Utility - Windows Product Key.

  • Download 3uTools 2.53 for Windows
  • Vistumbler - Open Source WiFi scanner and channel scanner
  • Password managers - Page 6 - AfterDawn: Software downloads
  • Download Acer Support Drivers and Manuals
  • Connected SharePoint Site Settings Moved
  • Download Android multi tools
  • AUTEL MaxiSYS Pro MS908P Program With WiFi
  • Asterisk Allstar on the Raspberry Pi 2/3/4
  • Contract Wars Hack Tool Unlimited GP
  • Download – HOBBYWING North America
  • Elm327 Mini Bluetooth Manual
  • Domain name search tool (Whois) for Windows
  • Mobileworld: Ultimate Serial key download
  • OurWorld Hack Tool Unlimited Gems
  • Download Paysafecard Code Generator ] - FREE Paysafecard
  • Download--MAYFLASH Limited Game Accessory Manufacture from

WiFile v1.02 - Palm OS wireless utility review

A keygen is made available through crack groups free to download. Version 1.48: Updated the internal MAC addresses file. We will send an account activation link to the email address you provide, so please make sure to use a valid address. In fact, it consists of not become one of those few items without which people can practically not endure these instances nor can any daily company carry on without any internet. The program lets you transfer files to and from your Palm OS Handheld (PDA) from shared directories on corporate networks, school servers and. MacOS - How Do I Activate and View a Hikvision Camera on a. Download Firmware Firmware Warning: It is highly recommended to consult with your Network or System Administrator before performing any software (firmware) update.

Wifi File Explorer Pro Freeware - Free Download Wifi File

A keygen is made available by crack groups free to download. This document contains an overview of the product, specifications, basic and in-depth usage instructions, and. Wifi hacker program v1.02. Hytera PC69 USB programming cable to program a Hytera BD305LF. Infinity box best NK2 v1.02 Download Free - DSMEDIA24. With WiFile and a WiFi-enabled PDA you can connect via wireless access point to a local area network or the Internet, directly access programs, databases, documents, spreadsheets, music and image. When writing a keygen, the author will identify the algorithm used in creating a valid cd key.

FRP Bypass App for Android Samsung to Bypass Google Account

The password hacker software works on all operating systems. Download hack wifi password android, hack wifi password android, hack wifi password android download free Avarana Software. Background I have a legal Adobe Photoshop CS6 serial number. Code Crack HD 1.1. Invisible, Skip Manager V1.81 Incl By Heritage. Firmware versions: All versions. Norton internet security 2020 full with keygen download.

Application closes after opening

hello people, I have an application that works correctly on pc, but at the time of building the apk with buildozer and install it on my cell phone it only installs but does not start, it closes automatically.
Annex the complete log. I hope you can help me. Thank you

03-02 14:41:10.756 8808 8808 V pythonutil: Loading library: sqlite3
03-02 14:41:10.757 8808 8808 V pythonutil: Loading library: ffi
03-02 14:41:10.758 8808 8808 V pythonutil: Loading library: SDL2
03-02 14:41:10.761 8808 8808 V pythonutil: Loading library: SDL2_image
03-02 14:41:10.764 8808 8808 V pythonutil: Loading library: SDL2_mixer
03-02 14:41:10.765 8808 8808 V pythonutil: Loading library: SDL2_ttf
03-02 14:41:10.767 8808 8808 V pythonutil: Loading library: ssl1.1
03-02 14:41:10.770 8808 8808 V pythonutil: Loading library: crypto1.1
03-02 14:41:10.772 8808 8808 V pythonutil: Loading library: python2.7
03-02 14:41:10.774 8808 8808 V pythonutil: Library loading error: dalvik.system.PathClassLoader[DexPathList[[zip file "/system/framework/org.apache.http.legacy.boot.jar", zip file "/data/app/com.treyapps.myapp.myapp-8ydHSBAFNKQW4fv8W2ncCQ==/base.apk"],nativeLibraryDirectories=[/data/app/com.treyapps.myapp.myapp-8ydHSBAFNKQW4fv8W2ncCQ==/lib/arm, /data/app/com.treyapps.myapp.myapp-8ydHSBAFNKQW4fv8W2ncCQ==/base.apk!/lib/armeabi-v7a, /system/lib, /vendolib]]] couldn't find "libpython2.7.so"
03-02 14:41:10.775 8808 8808 V pythonutil: Loading library: python3.5m
03-02 14:41:10.775 8808 8808 V pythonutil: Library loading error: dalvik.system.PathClassLoader[DexPathList[[zip file "/system/framework/org.apache.http.legacy.boot.jar", zip file "/data/app/com.treyapps.myapp.myapp-8ydHSBAFNKQW4fv8W2ncCQ==/base.apk"],nativeLibraryDirectories=[/data/app/com.treyapps.myapp.myapp-8ydHSBAFNKQW4fv8W2ncCQ==/lib/arm, /data/app/com.treyapps.myapp.myapp-8ydHSBAFNKQW4fv8W2ncCQ==/base.apk!/lib/armeabi-v7a, /system/lib, /vendolib]]] couldn't find "libpython3.5m.so"
03-02 14:41:10.775 8808 8808 V pythonutil: Loading library: python3.6m
03-02 14:41:10.776 8808 8808 V pythonutil: Library loading error: dalvik.system.PathClassLoader[DexPathList[[zip file "/system/framework/org.apache.http.legacy.boot.jar", zip file "/data/app/com.treyapps.myapp.myapp-8ydHSBAFNKQW4fv8W2ncCQ==/base.apk"],nativeLibraryDirectories=[/data/app/com.treyapps.myapp.myapp-8ydHSBAFNKQW4fv8W2ncCQ==/lib/arm, /data/app/com.treyapps.myapp.myapp-8ydHSBAFNKQW4fv8W2ncCQ==/base.apk!/lib/armeabi-v7a, /system/lib, /vendolib]]] couldn't find "libpython3.6m.so"
03-02 14:41:10.776 8808 8808 V pythonutil: Loading library: python3.7m
03-02 14:41:10.782 8808 8808 V pythonutil: Loading library: main
03-02 14:41:10.784 8808 8808 V pythonutil: Failed to load _io.so or unicodedata.so...but that's okay.
03-02 14:41:10.784 8808 8808 V pythonutil: Unsatisfied linker when loading ctypes
03-02 14:41:10.784 8808 8808 V pythonutil: Loaded everything!
03-02 14:41:10.785 8808 8808 V SDL : nativeSetupJNI()
03-02 14:41:10.786 8808 8808 V SDL : AUDIO nativeSetupJNI()
03-02 14:41:10.787 8808 8808 V SDL : CONTROLLER nativeSetupJNI()
03-02 14:41:10.807 8808 8808 D hidapi : Initializing Bluetooth
03-02 14:41:10.808 8808 8808 D hidapi : Couldn't initialize Bluetooth, missing android.permission.BLUETOOTH
03-02 14:41:10.832 8808 8808 V PythonActivity: Setting env vars for start.c and Python to use
03-02 14:41:10.832 8808 8808 V PythonActivity: Access to our meta-data...
03-02 14:41:10.834 8808 8808 I PythonActivity: Surface will NOT be transparent
03-02 14:41:10.834 8808 8808 V PythonActivity: onResume()
03-02 14:41:10.835 8808 8808 V SDL : onResume()
03-02 14:41:10.858 493 546 W ServiceManager: Permission failure: android.permission.ACCESS_SURFACE_FLINGER from uid=10214 pid=8808
03-02 14:41:10.859 493 546 D PermissionCache: checking android.permission.ACCESS_SURFACE_FLINGER for uid=10214 => denied (480 us)
03-02 14:41:10.864 8808 8808 V SDL : surfaceCreated()
03-02 14:41:10.865 8808 8808 V SDL : surfaceChanged()
03-02 14:41:10.865 8808 8808 V SDL : pixel format RGB_565
03-02 14:41:10.867 8808 8808 V SDL : Window size: 1080x1731
03-02 14:41:10.867 8808 8808 V SDL : Device size: 1080x1920
03-02 14:41:10.878 8808 8830 V SDL : Running main function SDL_main from library /data/app/com.treyapps.myapp.myapp-8ydHSBAFNKQW4fv8W2ncCQ==/lib/arm/libmain.so
03-02 14:41:10.878 8808 8830 V PythonActivity: appConfirmedActive() -> preparing loading screen removal
03-02 14:41:10.878 8808 8830 V SDL : nativeRunMain()
03-02 14:41:10.878 8808 8808 V SDL : nativeResume()
03-02 14:41:10.879 8808 8830 I python : Initializing Python for Android
03-02 14:41:10.880 8808 8830 I python : Setting additional env vars from p4a_env_vars.txt
03-02 14:41:10.880 8808 8830 I python : Changing directory to the one provided by ANDROID_ARGUMENT
03-02 14:41:10.880 8808 8830 I python : /data/use0/com.treyapps.myapp.myapp/files/app
03-02 14:41:10.880 8808 8830 I python : Preparing to initialize python
03-02 14:41:10.880 8808 8830 I python : _python_bundle dir exists
03-02 14:41:10.880 8808 8830 I python : calculated paths to be...
03-02 14:41:10.880 8808 8830 I python : /data/use0/com.treyapps.myapp.myapp/files/app/_python_bundle/stdlib.zip:/data/use0/com.treyapps.myapp.myapp/files/app/_python_bundle/modules
03-02 14:41:10.885 8808 8830 I python : set wchar paths...
03-02 14:41:10.944 8808 8830 I python : Initialized python
03-02 14:41:10.944 8808 8830 I python : AND: Init threads
03-02 14:41:10.945 8808 8830 I python : testing python print redirection
03-02 14:41:10.946 8808 8830 I python : Android path ['.', '/data/use0/com.treyapps.myapp.myapp/files/app/_python_bundle/stdlib.zip', '/data/use0/com.treyapps.myapp.myapp/files/app/_python_bundle/modules', '/data/use0/com.treyapps.myapp.myapp/files/app/_python_bundle/site-packages']
03-02 14:41:10.946 8808 8830 I python : os.environ is environ({'PATH': '/sbin:/system/sbin:/system/bin:/system/xbin:/odm/bin:/vendobin:/vendoxbin', 'DOWNLOAD_CACHE': '/data/cache', 'ANDROID_BOOTLOGO': '1', 'ANDROID_ROOT': '/system', 'ANDROID_ASSETS': '/system/app', 'ANDROID_DATA': '/data', 'ANDROID_STORAGE': '/storage', 'EXTERNAL_STORAGE': '/sdcard', 'ASEC_MOUNTPOINT': '/mnt/asec', 'BOOTCLASSPATH': '/system/framework/core-oj.jar:/system/framework/core-libart.jar:/system/framework/conscrypt.jar:/system/framework/okhttp.jar:/system/framework/bouncycastle.jar:/system/framework/apache-xml.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/telephony-common.jar:/system/framework/voip-common.jar:/system/framework/ims-common.jar:/system/framework/android.hidl.base-V1.0-java.jar:/system/framework/android.hidl.manager-V1.0-java.jar:/system/framework/framework-oahl-backward-compatibility.jar:/system/framework/android.test.base.jar:/system/framework/com.google.vr.platform.jar', 'SYSTEMSERVERCLASSPATH': '/system/framework/services.jar:/system/framework/ethernet-service.jar:/system/framework/wifi-service.jar:/system/framework/com.android.location.provider.jar', 'ANDROID_SOCKET_zygote_secondary': '12', 'ANDROID_ENTRYPOINT': 'main.pyc', 'ANDROID_ARGUMENT': '/data/use0/com.treyapps.myapp.myapp/files/app', 'ANDROID_APP_PATH': '/data/use0/com.treyapps.myapp.myapp/files/app', 'ANDROID_PRIVATE': '/data/use0/com.treyapps.myapp.myapp/files', 'ANDROID_UNPACK': '/data/use0/com.treyapps.myapp.myapp/files/app', 'PYTHONHOME': '/data/use0/com.treyapps.myapp.myapp/files/app', 'PYTHONPATH': '/data/use0/com.treyapps.myapp.myapp/files/app:/data/use0/com.treyapps.myapp.myapp/files/app/lib', 'PYTHONOPTIMIZE': '2', 'P4A_BOOTSTRAP': 'SDL2', 'PYTHON_NAME': 'python', 'P4A_IS_WINDOWED': 'True', 'P4A_ORIENTATION': 'portrait', 'P4A_NUMERIC_VERSION': 'None', 'P4A_MINSDK': '21', 'LC_CTYPE': 'C.UTF-8'})
03-02 14:41:10.946 8808 8830 I python : Android kivy bootstrap done. __name__ is __main__
03-02 14:41:10.946 8808 8830 I python : AND: Ran string
03-02 14:41:10.946 8808 8830 I python : Run user program, change dir and execute entrypoint
03-02 14:41:11.101 8808 8830 I python : [WARNING] [Config ] Older configuration version detected (0 instead of 21)
03-02 14:41:11.102 8808 8830 I python : [WARNING] [Config ] Upgrading configuration in progress.
03-02 14:41:11.107 8808 8830 I python : [INFO ] [Logger ] Record log in /data/use0/com.treyapps.myapp.myapp/files/app/.kivy/logs/kivy_19-03-02_0.txt
03-02 14:41:11.108 8808 8830 I python : [INFO ] [Kivy ] v1.11.0.dev0, git-Unknown, 20190302
03-02 14:41:11.108 8808 8830 I python : [INFO ] [Python ] v3.7.1 (default, Feb 21 2019, 15:28:11)
03-02 14:41:11.108 8808 8830 I python : [Clang 6.0.2 (https://android.googlesource.com/toolchain/clang 183abd29fc496f55
03-02 14:41:11.229 8808 8830 I python : Traceback (most recent call last):
03-02 14:41:11.229 8808 8830 I python : File "/home/trey/Escritorio/PafyDownloade.buildozeandroid/app/main.py", line 3, in
03-02 14:41:11.230 8808 8830 I python : File "/home/trey/Escritorio/PafyDownloade.buildozeandroid/platform/build/build/python-installs/myapp/pafy/__init__.py", line 7, in
03-02 14:41:11.230 8808 8830 I python : File "/home/trey/Escritorio/PafyDownloade.buildozeandroid/platform/build/build/python-installs/myapp/pafy/pafy.py", line 40, in
03-02 14:41:11.231 8808 8830 I python : File "/home/trey/Escritorio/PafyDownloade.buildozeandroid/platform/build/build/python-installs/myapp/pafy/util.py", line 18, in
03-02 14:41:11.232 8808 8830 I python : AttributeError: 'LogFile' object has no attribute 'encoding'
03-02 14:41:11.232 8808 8830 I python : Python for android ended.
03-02 14:41:11.349 8808 8813 F libc : Fatal signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0x6c in tid 8813 (Jit thread pool), pid 8808 (pps.myapp.myapp)
03-02 14:41:11.414 8834 8834 F crash_dump32: crash_dump.cpp:335] failed to open /proc/8808: No such file or directory
03-02 14:41:11.423 921 1163 W InputDispatcher: channel 'b6d5c71 com.treyapps.myapp.myapp/org.kivy.android.PythonActivity (server)' ~ Consumer closed input channel or an error occurred. events=0x9
03-02 14:41:11.423 921 1163 E InputDispatcher: channel 'b6d5c71 com.treyapps.myapp.myapp/org.kivy.android.PythonActivity (server)' ~ Channel is unrecoverably broken and will be disposed!
03-02 14:41:11.423 617 617 I Zygote : Process 8808 exited cleanly (255)
03-02 14:41:11.424 921 3562 I ActivityManager: Process com.treyapps.myapp.myapp (pid 8808) has died: fore TOP
03-02 14:41:11.425 921 3562 W ActivityManager: Force removing ActivityRecord{ddaa993 u0 com.treyapps.myapp.myapp/org.kivy.android.PythonActivity t1387}: app died, no saved state
03-02 14:41:11.430 921 3562 W InputDispatcher: Attempted to unregister already unregistered input channel 'b6d5c71 com.treyapps.myapp.myapp/org.kivy.android.PythonActivity (server)'
03-02 14:41:11.431 921 978 W libprocessgroup: kill(-8808, 9) failed: No such process
03-02 14:41:11.431 921 978 I libprocessgroup: Successfully killed process cgroup uid 10214 pid 8808 in 6ms
03-02 14:41:11.441 921 1568 W WindowManager: Failed looking up window callers=com.android.server.wm.WindowManagerService.windowForClientLocked:5512 com.android.server.wm.WindowState$DeathRecipient.binderDied:2448 android.os.BinderProxy.sendDeathNotice:1193
03-02 14:41:11.442 921 1568 I WindowManager: WIN DEATH: null
03-02 14:41:11.480 921 1030 W ActivityManager: setHasOverlayUi called on unknown pid: 8808
03-02 14:41:11.508 493 545 D SurfaceFlinger: duplicate layer name: changing com.google.android.apps.nexuslaunchecom.google.android.apps.nexuslauncher.NexusLauncherActivity to com.google.android.apps.nexuslaunchecom.google.android.apps.nexuslauncher.NexusLauncherActivity#1
03-02 14:41:11.527 22205 22205 W ThreadPoolDumper: Queue length for executor EventBus is now 11. Perhaps some tasks are too long, or the pool is too small.
03-02 14:41:11.541 22205 22232 W SessionLifecycleManager: Handover failed. Creating new session controller.
03-02 14:41:11.544 2229 27056 W ziparchive: Unable to open '/data/app/com.treyapps.myapp.myapp-q04oVpC91XN3rfyWfi_izQ==/base.apk': No such file or directory
03-02 14:41:11.545 2229 27056 E s.nexuslaunche: Failed to open APK '/data/app/com.treyapps.myapp.myapp-q04oVpC91XN3rfyWfi_izQ==/base.apk' I/O error
03-02 14:41:11.545 2229 27056 E ResourcesManager: failed to add asset path /data/app/com.treyapps.myapp.myapp-q04oVpC91XN3rfyWfi_izQ==/base.apk
03-02 14:41:11.545 2229 27056 W PackageManager: Failure retrieving resources for com.treyapps.myapp.myapp
03-02 14:41:11.602 22205 22232 I StreamController: registerScope: nowcards-15-1a158049-4acf
03-02 14:41:11.614 22205 22205 W View : requestLayout() improperly called by com.google.android.apps.gsa.staticplugins.nowstream.shared.renderers.fa{550aca2 V.E...... ......ID 0,0-1080,1920} during layout: running second layout pass
03-02 14:41:11.636 22205 22232 I StreamController: cleanUpControllerScope(nowcards-15-1a158049-4acf)
03-02 14:41:11.636 22205 22232 I StreamController: registerScope: nowcards-15-1a16002e-e96b
03-02 14:41:11.644 632 32007 D sound_trigger_hw: stdev_start_recognition:[1] Enter
03-02 14:41:11.644 632 32007 D sound_trigger_platform: platform_stdev_is_session_allowed: stdev->audio_concurrency_active 0 session_allowed 1
03-02 14:41:11.644 632 32007 D sound_trigger_hw: get_confidence_levels_payload: No smlib for uuid, sending opaque data
03-02 14:41:11.644 632 32007 D sound_trigger_platform: platform_stdev_send_hwmad_cal: previous acdb_id 128 new acdb_id 128, sw_mad 0 return
03-02 14:41:11.644 632 32007 D sound_trigger_platform: platform_stdev_send_calibration: sending afe calibration for device(1) acdb_id(128)
03-02 14:41:11.644 632 32007 I ACDB-LOADER: ACDB AFE returned = -19
03-02 14:41:11.644 632 32007 D sound_trigger_hw: sound_trigger_set_device: enable device (1) = listen-cpe-handset-mic
03-02 14:41:11.644 632 32007 D audio_route: Apply path: listen-cpe-handset-mic
03-02 14:41:11.646 22205 22205 I StreamRenderer: cleanUpRendererScope(nowcards-15-1a158049-4acf)
03-02 14:41:11.646 22205 22205 I StreamRenderer: maybeRegisterNowCardsScope(nowcards-15-1a16002e-e96b, co[email protected]e1df316)
03-02 14:41:11.663 22205 22205 W View : requestLayout() improperly called by com.google.android.apps.gsa.staticplugins.nowstream.shared.renderers.fa{550aca2 V.E...... ......ID 0,0-1080,1920} during layout: running second layout pass
03-02 14:41:11.679 632 32007 D sound_trigger_hw: cpe_reg_sm_params:[1] Enter
03-02 14:41:11.682 632 32007 D sound_trigger_hw: configure_lab: media_cfg format=0, packing=1, events=0, mode=1
03-02 14:41:11.721 632 32007 D sound_trigger_hw: cpe_reg_sm_params:[1] Exit, status=0
03-02 14:41:11.722 632 32007 D sound_trigger_hw: reg_hal_event_session: ST_EVENT_SESSION_REGISTER capture_handle 54 pcm 0xf4c83380
03-02 14:41:11.722 632 32007 D sound_trigger_hw: cpe_start:[1] Enter
03-02 14:41:11.727 632 32007 D sound_trigger_hw: cpe_start:[1] Exit, status=0
03-02 14:41:11.727 632 32007 D sound_trigger_hw: stdev_start_recognition:[1] Exit status 0
03-02 14:41:11.727 921 1250 I SoundTriggerHelper: startRecognition successful.
03-02 14:41:11.728 2085 2085 I GsaVoiceInteractionSrv: Start Hotword Recognition Status: true
03-02 14:41:12.097 632 32007 D audio_hw_primary: disable_audio_route: usecase(1) reset and update mixer path: low-latency-playback speaker
03-02 14:41:12.097 632 32007 D hardware_info: hw_info_append_hw_type : device_name = speaker
03-02 14:41:12.098 632 32007 D audio_hw_primary: disable_snd_device: snd_device(2: speaker)
03-02 14:41:14.245 670 888 I nanohub : osLog: [AR_CHRE] IDLE => ON
03-02 14:41:16.633 22205 8181 I EventLogSendingHelper: Sending log events.
03-02 14:41:20.252 2001 2317 I CarrierServices: [86] bur.a: FiST: Wifi connectivity status true
03-02 14:41:20.263 2001 2317 I CarrierServices: [86] buw.d: Connected state: [1], networkType: [WIFI]
03-02 14:41:21.633 22205 7372 I EventLogSendingHelper: Sending log events.

submitted by trey_d99 to kivy

Review of my installation

EDIT: added links, references, clarifications.
Hello all, happy automation.
So I'm finalizing my home automation set up and I figured I should share my experience, get your opinons, have some of you discover some cool stuff maybe. and please do shoot any questions you have. Before we get there, I want to thank YOU, the community for every and any piece of advice I’ve received, it's been easy sometimes and a hassle dole other times, to do it all on my own for now 2 months. sometimes I found myself messaging authors of this or that tweak and they all answered gladly. So huge thanks to all the community. Pressing on:
My flat is a 60sqm: 4 rooms + 1 hall. Also, I live alone, the following applies to my lifestyle. And finally, I'm essentially Apple equipped.
  • From the entrance door, you enter the hall
    • left: the toilet and the bathroom (separated : so 2 rooms)
    • right: the kitchen
    • forward, the living + bed area (so 1 room)

Non smart stuff I have:
  • Philips TV ambilight
  • 1 lamp stand
  • 1 lamp stand that can can take 3 bulbs simultaneously like this
  • 1 bulb socket in the hall, 1 in the kitchen, 1 in the living area, 1 in the bed area (Total 4)
  • PlayStation 4
  • Enough electric sockets to set a xmas tree on fire…

Apple HomeKit stuff I initially had:
  • HomePods x2 (serve as hubs, “hey Siri”)
  • Apple TV 4K (serves as hub)
  • iPad Air 2 (serves as hub, “hey Siri” when plugged, has the Home App)
  • iPhone X (“Hey Siri”, home App)
  • Apple Watch (“Hey Siri”, home App)
  • AirPods V2 (“Hey Siri”)
  • MacBook Pro (“Hey Siri”, home App)

IoT / smart stuff I later bought:
  • 3 yeelight color bulbs V2 (Initially non home kit comaptible til 2 weeks ago. They still require the yeelight app to work with Homekit)
  • 1 color bulb from koogeek (HomeKit compatible)
  • 1 Yeelight bed lamp V2 (HomeKit compatible)
  • Aqara Magic Cube (not HomeKit compatible)
  • Philips TV ambilight (listing it here again because it is smart capable with its API but not HomeKit compatible and also, let down by Philips despite released in 2018)
  • Playstation 4 Pro (you'll see below: it's possible to control it)
  • 2 Vibration sensors
  • 3 motion detectors (light/motion sensors)
  • Alarms and cameras (which I won't detail here for obvious reasons)

Apart from the Koogeek bulb and the yeelight bed lamp, everything else was not compatible with Apple's Homekit. I'm going to cover the part where I had to do without the compatibility.

PHASE ONE: Noob on budget vs. Homebridge>HomeKit.
To do so, I chose Homebridge. It needs a dedicated, always on, server. I bought
  • 1 Raspberry Pie 3 pack (includes: an outer shell, its energy cable, 16go SD card for the OS
  • 1 20cm ethernet cable (Raspberry <-> router, best network performances are wired)

If you decide to do the same, the easiest way to install homebridge on the raspberry is with a USB keyboard, USB mouse and HDMI screen. I didn’t have these, So I went the "headless" way with little to zero knowledge of terminal and coding or anything but hey. adventure times! and well, you can always flash the card again and start over.
From there, just follow the official tutorial and you'll get Homebridge running in a jiffy. Since I had yeelight bulbs, I then installed Homebridge-yeelight to Homebridge. Then, via the yeelight app on my iphone, I added the bulbs to it but there’s a specific step: you need to activate LAN network for each bulbs. (Again, bulbs V2 are compatible as of today, LAN or Homebridge altogether are no longer necessary. But for V1 it is still true).
I restarted Homebridge. Success! It detected the bulbs and added them to the Home app. At which point, I wondered that if there's an electricity shortage, will my Homebridge start again or will I have to start it myself? This is the part where you want to have Homebridge self start on boot.
So now, successfully using my bulbs: created the scene "TV" so I go like "hey Siri, I'm watching TV" and it turns the bulbs dark purple! Dope! (also, the bulbs that go into a 3-in-1 lamp, I grouped them as one “Lamp” in Home app for convenience). But you can still control them separately in automation and scenes. It's useful to group for example if you have 3 ceiling lamps in your living, or a bed lamp on both sides of your bed. see more here.
I realised my Apple TV and my TV had CEC protocol meaning that if I one is switched on, it switches the other on as well. I also made the Apple TV learn the TV's remote so I can use only one. As you can see, I really want to design for the simplest of configuration. Also, I don’t watch/have TV channels, just the Apple TV like Netflix and all..
But this is where I reached the limits of a hybrid system:
  • Given the current state of HomeKit, the yeelight app (or koogeek or any manufacturer) are so much more powerful. Through them, you can set up color transitions i.e. candle light, birthday party, or your own. the iOS home app has only the basics. light, intensity, and a color spectrum. (But to compensate for it, you can use Apple iOS shortcuts -for -apps and set up a specific vocal command like “hey Siri, happy birthday”, which will load the command from yeelight, not HomeKit. In other words: using Siri to do things HomeKit can't. Bummer: you must have each manufacturer's app, which I hate but that's just me.
  • Currently, you can’t link the TV scene to the Apple TV state. Meaning turning the Apple TV on will turn on the TV but can't activate the TV scene. And turning it off won’t … you get the picture. But there’s an alternative:
@viticci created an Apple Shortcut that does just that. initially the shortcut didn't include the TV scene so I added it in the shortcut myself, pretty easy but losing the "must be night" condition. 2 things to know:
  • The shortcut won’t work with iOS13 and will probably be deprecated since the feature will be natively supported the next OS generations coming out next September 10th.
  • It doesn’t let you turn off the Apple TV. Only turn on.
  • under iOS13, you'll be able to turn on and off the Apple TV
Good enough til iOS13.

Extra cool stuff:
  • I set up scenes so that lights in the living would turn red slowly towards midnight, at which they shut out completely. given HomeKit limitations, I had to create scenes that will go successively:
  1. From sunset minus 1h (not so much daylight here in my flat) to 8.30pm Scene "Sunset"
  2. From 8:30pm to 9:45pm "Evening"
  3. ... to "Late evening” to … you get the idea
  4. And if anything, interrupted it (i.e. TV scene), I can always say ”Hey Siri, it's late" or "it's late night". Pretty dope. The point of that automation was to limit blue light, and encourage me to go to sleep early.
  • I jailbroke my iPhone so that when it connects to my wifi and if it’s playing music, it airplays to my HomePod pair. In terms of experience, it equals to “when I arrive home, airplay to the living room”. Works with music, spotify, podcasts, anything. It's far better than having to tap on the HomePod with your iPhone like in iOS13, especially if your HomePod is far away next to your TV.
Remarks: Regarding the yeelight bulbs: they’ve become home kit compatible but you still need to register them via the Yeelight App and only then tap “Add device to Homekit”. The Yeelight bedlamp doesn’t require any of this and comes with a home kit QR code.
That leads us to

I realised I was going around my place, constantly talking to my watch or iPhone or iPad or AirPods or HomePods to tell my system to turn on/off lights, and stuff. It bothered me so much. Even after a year, I find voice interfaces pretty limited, until we reach something like in "Her" or "Black Mirror". Basically a home assistant that can pass the Turing test. (And yes, I can cite plenty more, like TAU, Detroit: Become human, Mallory Archer in the last season, etc etc.)
A solution: Sensors !
At first, I wanted to do with what I had: My macbook unlocks without a password: it detects if my watch is close by and on my wrist (unlocked + heartbeat). In a sense, you could say my initial sensors were my wifi, iPhone’s gps, and bluetooth. Sadly: there are no known software or technological solution reliable enough, even within the realm of jailbreak.
The Home App offers fairly basic but cool things like "when I arrive home" automations. So I had that covered. In addition, some advanced Shortcuts help do more but they are so specific that few of us benefit from them. So I bought a light/presence detector from Aqara (FYI: Mi, Aqara, Yeelight are the same manufacturer).
Most of their devices aren't HomeKit compatible, use a different protocole called ZigBee and require a Hub generally sold under the same brand. The hub discovers and connects them to your Homekit set up. So you either buy said hub or a substitute. I chose a substitute out of certain concerns:

So I chose to go with said alternative: USB thumb Conbee II. It is equipped with the hardware necessary to sniff out said Zigbee only device (sparing A LOT OF details here). When the thumb was configured, I plugged it into the Raspberry and from there, it creates a web interface (safari, chrome, etc) accessible from any device on your network, from where you can add sensors.
In homebridge, you must perform some tasks so that Homebridge has access to the usb via terminal. Then install Homebridg-hue. It will get the data from the Conbee to Homebridge and Homebridge injects them into home kit. Restart both and Et Voila! My AQARA sensor appears in home kit! Pretty dope!
I put it up the kitchen and set up a rule: #1 if it detects movements at night, it turns on the light. At first, it felt like in the movies, things would lit up when you show up, awesome. But I realise when I'm out of the room, the light is still on. So I added another rule: #2 when it stops detecting movement, it turns off the light. But the light would still be on for 3min (the sensor refreshes every 180sec, can’t change that). So I deleted #2 and created #3 if it detects movements at night, it turns off the light after 3min. But it didn’t match how long I stayed in that room in average. Sooo I bought 1 more sensor to set up in the hallway, created rule #4: If hallway sensor is triggered, turn off the light in the kitchen. Also #5: if it’s night, turn on the hallway light. DOPE!
But in order to reach the kitchen, I go through the hall, triggering the sensor there and if I get out before 3min, since the it's already triggered, it doesn’t turn off the kitchen… Sooooooooo I recently bought another one for the living room. Which when triggered will turn off the the hall and the kitchen.
This is the best I can achieve: since I spend most of my time in the living, then it will ultimately turn off the lights. Still 3min delay (minus the time spent elsewhere) but, meh. I had a look into alternatives: expensive and not common, i.e. laser technology that can tell if you’re going in or out of a room.
To close that chapter, I chose to stick with my solution above.


The playstation 4
It’s possible to turn on your playstation 4 via home kit / Homebridge. The playstation has CEC too. As opposed to the Apple TV, you can link the playstation status to a scene. So shortly put: “Hey Siri, turn on the playstation”. It will turn the device, which will turn the TV on and set the playstation “ambiance” for the light. DOOOOOPE. “Hey Siri, turn off the playstation”, playstation and TV off, and if it’s night, turn on the “evening” lights. (create one rule for the day, one for the night). Dope!
The TV
That was the hardest and I’m not yet done with it. So I have a Philips Ambilight 3 sides. To give you the full picture: they vary from one model to the next:
  • They may have 3 ambilight sides or 2
  • Android TV or not
  • API 6.x or not
  • May be or not compatible with your Philips Hue Bridge. If yes, it can work together with your other Philips Hue bulbs
  • The recent Philips TV may not have any ambilight but you can buy ambilight stripes to stick behind the TV and obtain the same effect via a Hue bridge.

Anyway, I had the support of many users to have it work. Today, in my home kit I can see:
  • TV Switch off/on: as of now, I can only switch the TV on, the off part is left to be done. I talked with the dev who sent me the instructions but it’s fairly complicated. Work in progress.
  • TV Volume slider: it’s disguised as a luminosity slider and it’s a 1:4 ratio: 100% lux equals 25 decibel. Needs adjustments
  • TV Ambilight Switch off/on: does what it says
  • TV Next input source: changes to the next source, dope to switch from one HDMI to the next.
  • TV Previous Input source.
The TV on/off status can be used too with scenes and all like the PS4.
I let you imagine how much fun it is. Let me give you a bit of reality check though:
  • The playstation status acts sporadically: if you have a passcode or must select a user, it will not return a success signal to your system in time, Siri will speak of failure to complete the request… but it’s just a 5secs delay.
  • The CEC tech is different from one tv to the next so some will turn on, some will turn off or not. Some will not switch to the right HDMI, therefore next/previous source switches are pretty convenient. Which leads me to the last part:

The Aqara Magic Cube
I bought that little thing. It’s Aqara so it’s just like the sensors: must be sniffed out by your Conbee II first. I named it HyperCube. I might change to Tesseract haha. sci fi geek nerd here
In the home app: you'll see a new type of device: a programmable sensor. You can only program it from that screen, not from automation or scenes.
Initially, the Aqara instructions speaks of 6 interactions:
  • Rotate 90 vertically
  • Rotate 180 vertically
  • Push/slide forward
  • Spin horizontally (disregard degrees)
  • Double tap the cube on the table
  • Shake
I was expecting the same in Home app but nope! You get an awesome total of 9 virtual switches and each have 2 to 3 variants:
  • 1 for each of the cube’s face, for each:
    • Single press: corresponds to 90° rotation
    • Double press: corresponds to double tap
    • Long press: corresponds to the push/slide on the table where the cube is
  • 1 for the spin clockwise
    • Spin a little
    • Spin a lot
    • 3rd thing but I haven’t discovered it
  • 1 for spin counter clockwise
    • Spin a little
    • Spin a lot
    • 3rd thing but I haven’t discovered it
  • 1 for Shake
    • 2 actions: one is shake, the other one I haven’t discovered it

Imagine all the combinations. I don’t even have enough appliances for that many interactions. I’m using it to activate lights, scenes around my flat. Also, I finally have a proper way to turn off the lights in the kitchen and hallway and switch from one HDMI to the next. And stuff. Let’s just say, I interact a LOT less with my voice. It’s really what I wanted.
I find my self asking Siri to turn on the playstation, the TV turns on, the lights go dark blue and if the TV was on the Apple TV HDMI, I just spin the cube a little to the right. If I'm done, I shake it, turning it all off and if it's night, it'll turn the evening lights on. d......ope ! wanna watch Netflix? spin it to the left.

Vibration sensors
They are from Aqara so same story Deconz>homebridge>homekit. Even more Fun.
It’s a little rectangle that you put onto a surface, wall, door, bed, else and is triggered by vibration from said surface. There’s the classic case of sticking it onto your washing machine: rule: when it no longer detects motion, meaning the machine is done, send notification. more examples
You can also set one on your entrance door so it turns on the hall light. But I live in a building and I wonder: if a floor neighbour slams their door, put up the music bass loud enough.. Also, it can’t tell wether you’re going in or out. And I already had the light sensors so…
So I put my second one at one corner of the bed frame where I usually get onto the bed: rule is: if I enter my bed from 10pm to 1am, trigger the bed lamp in red (no blue light) for 1 minute (because I have the intent to sleep), activate alarms and turn off everything else TV, bulbs. The sensor is far enough to not be triggered by movement in my sleep. So that is so dope as well.
Other example of vibration sensors use: to put them on the interior side of drawers you don’t want your children to open. Mini bars, knives, drugs, safes etc..

  • 1 smart socket for my kitchen boiler: I’ll leave it on with some adhesive (hahah I know). Rule: between 6am to 12pm if the bed sensor is triggered, meaning I’m leaving the bed, water boils for 1min, hot but not too much for tea.
  • 1 smart socket for the bed and temperature sensor: I was offered an electric bed sheet that warms up, for cold nights. Rule is: when if it’s cold and from 11pm to 0am, warm up the bed”.
  • Kids night lights with infrared: They detect movement at close range 30cm or so and turn on a gentle light. My use would be to put them inside drawers, kitchen cabinets, etc: when I open one, it lits up inside. Doesn't need home kit or anything, works as a stand alone.

So here you go, this is me. Apart from alarms and cameras.
I’ll just like to add the follwing:
Anything electronic can be hacked into. We are growing into a world where amounts of data produced and collected go WAY beyond the sum of information contain in all books in the history of mankind, that’s how much data there is to tap into. That calls for security: my advice, get a second router and set up a secured local network and only this one would connect to the internet. Also, I’m happy Apple takes steps to secure homekit. It’s always a mouse and cat game but there’s that still.
Also, you may want to install Homebridge-config-ui to use less terminal and more of an actual interface
I hope I was clear enough. I took out specifications because you can always ask the questions!
Happy automation !
submitted by peytonJfunk to homebridge

0 thoughts on “Key lecture maker 2.0 fullerton

Leave a Reply

Your email address will not be published. Required fields are marked *